Marine Grade 2:1 Heat Shrink Tube Dual Wall Heat Shrink Tubing Glue Inside Fast Wrap

2:1 Heat Shrink Ratio (not with glue line) (available diameter size)

Diameter:6mm     After Shrinking:3mm

Diameter:7mm     After Shrinking:3.5mm

Diameter:10mm     After Shrinking:5mm

Product: 2:1 Single Wall with No Glue

              3:1 Double Wall with Glue Line

              4:1 Double Wall with Glue Line

Material:Polyolefin
Minimum Shrinkage Temp:+70°C
Full Shrinkage Temp:+110°C maximum
Operating Temperature:-55°C to +125°C
Tensile strength:10.4 Mpa
Dielectric strength:15 kV/mm
Manufacture specification:ISO9001
Flammability:Flame Retardant
Approvals:UL Approved
Supplied format (round or flat):Product is supplied flat
Cutting method:Scissors or sharp knife

Heat shrinkable tube has excellent un-flammability, flexibility, and insulation. The shrinking temperature is very low and it can shrink very quickly. It is suitable for various electric insulation and bonding of cables and connectors and widely applied for connecting or end-handling, electric wire, insulating and harness of electric wire, corrosion-proof of metallic rods or tubes, and antenna.

Double wall heat shrink tube is thick layer of quality insulation, it provides excellent property of both insulation and sealing, it is best used when corrosion protection,resist to destroy, abrasion resistant and long lasting sealing are required.

NOTE

1. As different computers display colors differently, the color of the actual item may vary slightly from the above images.
2. Please allow 1-3 CM differs due to manual measurement.

3. Since the size above is measured by hand, the size of the actual item you received could be slightly different from the size above，please make sure you do not mind before you place an order！

Thanks for your understanding.